Serial Triggering and Analysis Application Modules Datasheet

AERO • AUDIO • AUTO • AUTOMAX •COMP • EMBD• FLEX

Features & Benefits

  • Automated Serial Triggering, Decode, and Search options for I2C, SPI, CAN, LIN, FlexRay, RS-232/422/485/UART, MIL-STD-1553, and I2S/LJ/RJ/TDM.
  • Trigger on all the critical elements of a serial bus such as address, data, etc.
  • Decode all the critical elements of each message. No more counting 1s and 0s!
  • Search through long acquisitions using user-defined criteria to find specific messages.
  • Event table shows decoded serial bus activity in a tabular, time-stamped format for quick summary of system activity.
  • Export Event table data to .csv format.

 

Serial Triggering and Analysis Application Modules

On a serial bus, a single signal often includes address, control, data, and clock information. This can make isolating events of interest difficult. The Serial Application modules for the MDO/MSO/DPO4000B, MDO3000, and MSO/DPO2000B Series transform the oscilloscopes into a robust tool for debugging serial buses with automatic trigger, decode, and search for I2C, SPI, CAN, LIN, FlexRay, RS-232/422/485/UART, MIL-STD-1553, and I2S/LJ/RJ/TDM.

Serial Triggering

Triggering on a specific transmit data packet going across an RS-232 bus. A complete set of triggers, including triggers for specific serial packet content, ensures you quickly capture your event of interest.

Trigger on packet content such as start of packet, specific addresses, specific data content, unique identifiers, etc. on popular serial interfaces such as I2C, SPI, CAN, LIN, FlexRay, RS-232/422/485/UART, MIL-STD-1553, and I2S/LJ/RJ/TDM.

Bus Display

Color-coded display of a CAN bus, showing Start, DLC, Data, CRC, and Stop components of the serial signal.


Simultaneously display the bus and digital waveforms. Digital waveforms show how the bus translates the individual signals based on the threshold settings (useful for making analog channels look like just 1s and 0s).

Provides a higher-level, combined view of the individual signals (clock, data, chip enable, etc.) that make up your bus, making it easy to identify where packets begin and end and identifying subpacket components such as address, data, identifier, CRC, etc.

Bus Decoding

Tired of having to visually inspect the waveform to count clocks, determine if each bit is a 1 or a 0, combine bits into bytes, and determine the hex value? Let the oscilloscope with a Serial Application module do it for you! Once you’ve set up a bus, the oscilloscope will decode each packet on the bus, and display the value in hex, binary, decimal (LIN, MIL-STD-1553, and FlexRay only), signed decimal (I2S/LJ/RJ/TDM only), or ASCII (RS-232/422/485/UART only) in the bus waveform.

Event Table

Event table showing decoded Identifier, DLC, DATA, and CRC for every CAN packet in a long acquisition.

In addition to seeing decoded packet data on the bus waveform itself, you can view all captured packets in a tabular view much like you would see in a software listing. Packets are time stamped and listed consecutively with columns for each component (Address, Data, etc.).

Search

Search – I2C decode showing results from a Wave Inspector® search for Address value 50. Wave Inspector® controls provide unprecedented efficiency in viewing and navigating waveform data.

Serial triggering is very useful for isolating the event of interest, but once you’ve captured it and need to analyze the surrounding data, what do you do? In the past, users had to manually scroll through the waveform counting and converting bits and looking for what caused the event. With a Serial Application module, you can enable the oscilloscope to automatically search through the acquired data for user-defined criteria including serial packet content. Each occurrence is highlighted by a search mark. Rapid navigation between marks is as simple as pressing the Previous (←) and Next (→) buttons on the oscilloscope front panel.

Characteristics

I2C Characteristics

Bus Setup Options

Characteristic

Description

Sources (Clock and Data)

Analog channels 1-4

Digital channels D0-D15

Thresholds

Per-channel thresholds

Recommended Probing

Single Ended

Include R/W in Address

Yes or No

Decode Formats Available

Hex

Binary

Display Modes

   Bus

Bus only

   Bus and Waveforms

Simultaneous display of bus and logic waveforms

   Event Table

Decoded packet data in a tabular view

Bus Trigger and Search Options

Characteristic

Description

Trigger and/or Search On

Start

Stop

Repeated Start

Missing Ack

Address (7 or 10 bit) with R/W Selection

Data (number of bytes 1-5)

Address and Data

Bus Decode

Characteristic

Description

Maximum Clock/Data Rate

Up to 10 Mb/s (for automated decoding of bus)

Decode Display

Start (green bracket)

Address (yellow box)

Missing Ack (red ! symbol)

Data (cyan box)

Stop (red bracket)


I2C bus setup, showing selection of bus display modes.


Triggering on a specific address value on the I2C bus.


Event table for I2C bus with all captured packets time stamped and in a tabular view.

SPI Characteristics

Bus Setup Options

Characteristic

Description

Sources (Clock, Slave Select, MOSI, and MISO)

Analog channels 1-4

Digital channels D0-D15

Thresholds

Per-channel thresholds

Recommended Probing

Single Ended

Decode Configuration

   Framing

Idle Time (2-wire SPI)

Slave Select (3-wire or 4-wire SPI)

   Clock

Rising or Falling Edge

   Slave Select

Active High or Active Low

   MOSI

Active High or Active Low

   MISO

Active High or Active Low

   Word Size

4-32 bits

   Bit Order

Most Significant (MS) First

Least Significant (LS) First

Decode Formats Available

Hex

Binary

Display Modes

   Bus

Bus only

   Bus and Waveforms

Simultaneous display of bus and logic waveforms

   Event Table

Decoded packet data in a tabular view

Bus Trigger and Search Options

Characteristic

Description

Trigger and/or Search On

SS Active

Start of Frame

MOSI

MISO

MOSI and MISO

Data: maximum of 128 bits (up to four 32-bit words or 32 four-bit words)

Bus Decode

Characteristic

Description

Maximum Clock/Data Rate

Up to 50 Mb/s (for automated decoding of bus)

Decode Display

Start (green bracket)

Data (cyan box)

Stop (red bracket)


SPI bus setup, showing configuration options for bus sources.


Triggering on a specific MOSI data value on the SPI bus.


Event table for SPI bus with all captured packets time stamped and in a tabular view.

RS-232/UART/RS-422/RS-485 Characteristics

Bus Setup Options

Characteristic

Description

RS-232/UART Sources (Transmit and Receive)

Analog channels 1-4

Digital channels D0-D15

RS-422/RS-485 Sources (Transmit and Receive)

Analog channels 1-4

Thresholds

Per-channel thresholds

Recommended Probing

   RS-232/UART

Single Ended

   RS-422/RS-485

Differential

Polarity

Normal (RS-232)

Inverted (UART, RS-422/RS-485)

Decode Configuration

   Bit rate

      Pre-defined list of rates

50 b/s - 2.8 Mb/s

      Custom

50 b/s - 10 Mb/s

   Data bits

7, 8, or 9

   Parity

None, Odd, or Even

   Packets

On or Off

   End of packet

00h (NUL)

0Ah (LF)

0Dh (CR)

20h (SP)

FFh

Decode Formats Available

Hex

Binary

ASCII

Display Modes

   Bus

Bus only

   Bus and Waveforms

Simultaneous display of bus and logic waveforms

   Event Table

Decoded packet data in a tabular view

Bus Trigger and Search Options

Characteristic

Description

Trigger and/or Search On

Tx Start Bit

Rx Start Bit

Tx End of Packet

Rx End of Packet

Tx Data (number of bytes 1-10)

Rx Data (number of bytes 1-10)

Tx Parity Error

Rx Parity Error

Bus Decode

Characteristic

Description

Maximum Bit Rate

Up to 10 Mb/s (for automated decoding of bus)

Decode Display

Data (cyan box)

Errors (red box)

   - Parity

   - Framing


RS-232 bus setup, showing bit rate options for RS-232 bus.


Triggering on a specific Tx data value on the RS-232 bus.


Event table for RS-232 bus with all captured packets time stamped and in a tabular view.

CAN Characteristics

Bus Setup Options

Characteristic

Description

Source for CAN_H, CAN_L, Rx, or Tx Probing

Analog channels 1-4

Digital channels D0-D15

Source for Differential Probing

Analog channels 1-4

Thresholds

Per-channel thresholds

Recommended Probing

   CAN_H, CAN_L, Rx, Tx

Single Ended

   Differential

Differential

Bit Rate

   Pre-defined list of rates

10 Kb/s - 1 Mb/s

   Custom

10 Kb/s - 1 Mb/s

Sample Point

Position at 5% to 95% within bit period or unit interval

Decode Formats Available

Hex

Binary

Display Modes

   Bus

Bus only

   Bus and Waveforms

Simultaneous display of bus and logic waveforms

   Event Table

Decoded packet data in a tabular view

Bus Trigger and Search Options

Characteristic

Description

Trigger and/or Search On

Start of Frame

Type of Frame (Data, Remote, Error, Overload)

Identifier (Standard or Extended)

Data (number of bytes 1-8, trigger or search when =, ≠, <, >, ≤, ≥)

Identifier and Data

End of Frame

Missing Ack

Bit Stuffing Error

Bus Decode

Characteristic

Description

Maximum Bit Rate

Up to 1 Mb/s (for automated decoding of bus)

Decode Display

Start (green bracket)

Identifier (yellow box)

DLC, CRC (purple box)

Missing Ack (red ! symbol)

Data (cyan box)

Stop (red bracket)

Errors (red box)

   - End of Frame

   - Bit Stuffing


CAN bus setup, showing signal type options for CAN bus.


Triggering on a specific data value on the CAN bus.


Event table for CAN bus with all captured packets time stamped and in a tabular view.

LIN Characteristics

Bus Setup Options

Characteristic

Description

Source

Analog channels 1-4

Digital channels D0-D15

Thresholds

Per-channel thresholds

Recommended Probing

Single Ended

Sample Point

Position at 10% to 90% within bit period or unit interval

Decode Configuration

   Polarity

Normal or Inverted

   Bit rate

      Pre-defined list of rates

1.2 kb/s - 19.2 kb/s

      Custom

800 b/s - 100 kb/s

   LIN standard

v1.x, v2.x, or Both

   Include parity bits with ID

Yes or No

Decode Formats Available

Mixed: ID and Parity are shown in Hex, Data and Checksum are shown in Binary

Hex: all fields

Binary: all fields

Display Modes

   Bus

Bus only

   Bus and Waveforms

Simultaneous display of bus and logic waveforms

   Event Table

Decoded packet data in a tabular view

Bus Trigger and Search Options

Characteristic

Description

Trigger and/or Search On

Sync

Identifier

Data (number of bytes 1-8; trigger or search when =, ≠, <, >, ≤, ≥, inside range, outside range)

Identifier and Data

Wakeup Frame

Sleep Frame

Error (Sync, ID Parity, Checksum)

Bus Decode

Characteristic

Description

Maximum Bit Rate

Up to 1 Mb/s, by LIN definition up to 20 kb/s (for automated decoding of bus)

Decode Display

Start (green bracket)

Sync, Break (purple box)

Identifier, Parity (yellow box)

Data (cyan box)

Checksum, Wakeup (purple box)

End of frame (red bracket)

Errors (red box)

   - Sync

   - Parity

   - Checksum

   - Header Time

   - Response Time

   - Frame Time

   - Response and Frame Time


LIN bus setup, showing source configuration options for LIN bus.


Triggering on a Sync Error on the LIN bus.


Event table for LIN bus with all captured packets time stamped and in a tabular view.

FlexRay Characteristics

Bus Setup Options

Characteristic

Description

Source for Single-ended Probing

Analog channels 1-4

Digital channels D0-D15

Source for Differential Probing

Analog channels 1-4

Thresholds

High and Low thresholds per channel

Recommended Probing

Single Ended or Differential

Decode Configuration

   Bit rate

2.5 Mb/s, 5 Mb/s, 10 Mb/s, or Custom (1 Mb/s - 100 Mb/s)

   Channel type

A or B

   Polarity

BDiff or BP, BM, Tx or Rx

Decode Formats Available

Mixed: Identifier, Payload Length and Cycle Count are shown in Decimal, Data and CRCs are shown in Hex.

Hex: all fields

Binary: all fields

Display Modes

   Bus

Bus only

   Bus and Waveforms

Simultaneous display of bus and logic waveforms

   Event Table

Decoded packet data in a tabular view

Bus Decode

Characteristic

Description

Maximum Bit Rate

Up to 10 Mb/s (for automated decoding of bus)

Decode Display

TSS (purple box)

Start (green bracket)

Frame ID (yellow box)

Payload Length (purple box)

Headers (purple box)

   - Null

   - Normal

   - Sync

   - Payload

   - Startup

   - Unknown

   - Null Sync

   - Payload Sync

   - Null Startup

   - Payload Startup

   - CRC

Cycle Count (yellow box)

Data (cyan box)

CRC, DTS, CID (purple box)

Stop (red bracket)

   - TSS

   - Header CRC

   - Trailer CRC

   - Null Frame

   - Sync Frame

   - Startup Frame

   - BSS

   - FSS

Bus Trigger and Search Options

Characteristic

Description

Trigger and/or Search On

Start of Frame

Indicator Bits (Normal, Null, Payload, Sync, Startup)

Identifier (trigger when =, ≠, <, >, ≤, ≥, inside range, outside range)

Cycle Count (trigger when =, ≠, <, >, ≤, ≥, inside range, outside range)

Header Fields (Indicator Bits, Identifier, Payload Length, Header CRC, and Cycle Count)

Data (number of bits 1-16; byte offset ‘don’t care’ – 253; trigger when =, ≠, <, >, ≤, ≥, inside range, outside range)

Identifier and Data

End of Frame (Static, Dynamic (DTS), All)

Error (Header CRC, Trailer CRC, Null Frame (static or dynamic), Sync Frame, Startup Frame)


FlexRay bus setup, showing input options for FlexRay bus.


PC-based, eye-diagram analysis software builds an eye-diagram from the entire acquisition and plots it against TP1 mask called out by the FlexRay standard.

I2S/LJ/RJ/TDM Characteristics

Bus Setup Options

Characteristic

Description

Sources (Clock, Word, Data)

Analog channels 1-4

Digital channels D0-D15

Thresholds

Per-channel thresholds

Recommended Probing

Single Ended

Decode Configuration

   Word size

4-32 bits

   Clock

Rising or falling edge

   Word Select polarity

Normal or Inverted

   Data High

1 or 0

   Bit order

Most Significant (MS) First

Least Significant (LS) First

Decode Formats Available

Signed Decimal

Hex

Binary

Display Modes

   Bus

Bus only

   Bus and Waveforms

Simultaneous display of bus and logic waveforms

   Event Table

Decoded packet data in a tabular view

Bus Trigger and Search Options

Characteristic

Description

Trigger and/or Search On

Word Select

Frame Sync

Data (select either word, left word, or right word; trigger or search when =, ≠, <, >, ≤, ≥, inside range, outside range)

Bus Decode

Characteristic

Description

Maximum Clock/Data Rate

Up to 12.5 Mb/s (for automated decoding of I2S/LJ/RJ bus)

Up to 25 Mb/s (for automated decoding of TDM bus)

Decode Display

Start (green bracket)

Data (cyan box)

Stop (red bracket)


I2S bus setup, showing input configuration options for I2S bus.


Triggering on a specific data value on the I2S bus.


Event table for I2S bus with all captured packets time stamped and in a tabular view.

MIL-STD-1553 Characteristics

Bus Setup Options

Characteristic

Description

Source

Analog channels 1-4

Reference waveforms 1-4

Math waveform

Thresholds

High and Low threshold per source

Recommended Probing

Differential or Single Ended (only one single-ended signal required)

Decode Configuration

   Polarity

Normal or Inverted

   Bit rate

1 Mb/s per the standard

   Response Time

2μs – 100μs

Decode Formats Available

Mixed1: Hex (data), Decimal (addresses and count), Binary (bits)

Mixed2: ASCII (data), Decimal (addresses and count), Binary (bits)

Block Hex

Hex and Binary

Binary

Display Modes

   Bus

Bus only

   Bus and Waveforms

Simultaneous display of bus and logic waveforms

   Event Table

Decoded packet data in a tabular view

Bus Trigger and Search Options

Characteristic

Description

Trigger and/or Search On

Sync

Word Type*2 (Command, Status, Data)

Command Word*2 (set RT Address (=, ≠, <, >, ≤, ≥, inside range, outside range), T/R, Sub-address/Mode, Data Word Count/Mode Code, and Parity individually)

Status Word*2 (set RT Address (=, ≠, <, >, ≤, ≥, inside range, outside range), Message Error, Instrumentation, Service Request Bit, Broadcast Command Received, Busy, Subsystem Flag, Dynamic Bus Control Acceptance (DBCA), Terminal Flag, and Parity individually)

Data Word (user-specified 16-bit data value)

Error (Sync, Parity, Manchester, Non-contiguous data)

Idle Time (minimum time selectable from 4 µs to 100 µs; maximum time selectable from 12 µs to 100 µs; trigger on < minimum, > maximum, inside range, outside range)

Bus Decode

Characteristic

Description

Maximum Clock/Data Rate

Up to 1 Mb/s (for automated decoding of bus)

Decode Display

Start (green bracket)

Sync*3 (purple box) with Word Type identified

Address (yellow box)

R/T (purple box)

Word Count (purple box)

Status Bits (purple box)

Data (cyan box)

Parity (purple box)

Stop (red bracket)

Errors (red box)

*2 Trigger selection of Command Word will trigger on Command and ambiguous Command/Status words. Trigger selection of Status Word will trigger on Status and ambiguous Command/Status words.

*3 Ambiguous Command and Status words will be labeled with C/S and a generic bit decode will be displayed.


MIL-STD-1553 bus setup, showing threshold entry fields.


Triggering on a specific data value on the MIL-STD-1553 bus.


Event table for MIL-STD-1553 bus with all captured packets time stamped and in a tabular view.

DPO4USB

Bus Setup Options

Characteristic

Description

USB 2.0 Compatibility

Low-speed and Full-speed: All MDO/MSO/DPO4000 Series models

High-speed: Models with 1 GHz analog channel bandwidth

Sources

Single-ended:

   Analog channels 1-4

   Digital channels D0-D15

Differential:

   Analog channels 1-4

   Math channel

   Reference channels 1-4

Recommended Probing

Low-speed and Full-speed: Single-ended or differential

High-speed: Differential

Thresholds Presets

Low-speed and Full-speed: Single-ended (D+: 1.4 V; D–: –1.4 V), differential (High: 1.4 V; Low: –1.4 V)

High-speed: Differential (High: 100 mV; Low: –100 mV)

Decode Formats Available

Mixed1: Frame and Address are shown in Decimal, Data shown in Hex

Mixed2: Frame and Address are shown in Decimal, Data shown in ASCII

Hex: all fields

Binary: all fields

Display Modes

   Bus

Bus only

   Bus and waveforms

Simultaneous display of bus and logic waveforms

   Event table

Decoded packet data in a tabular view

Bus Decode

Characteristic

Description

USB 2.0 Data Rates

Low-speed: 1.5 Mb/s

Full-speed: 12 Mb/s

High-speed: 480 Mb/s

Decode Display

Start (green bar)

PID (yellow packet)

Data (cyan packet)

CRC (purple packet)

Stop (red bar)


Triggering on a specific PID on an USB FS bus.


High-speed USB decoded display, automatically displaying bus content.


USB decoded Event table showing all packet information with time-stamp information.

Bus Trigger Options

Characteristic

Description

Trigger and/or Search On

Low-speed: Trigger/Search on Sync, Reset, Suspend, Resume, End of Packet, Token (Address) Packet, Data Packet, Handshake Packet, Special Packet, Error.

   Token Packet – Any token type, SOF, OUT, IN, SETUP; Address can be further specified to trigger on ≤, <, =, >, ≥, ≠ a particular value, or inside or outside of a range. Frame number can be specified for SOF token using Binary, Hex, Unsigned Decimal, and Don't Care digits.

   Data Packet – Any data type, DATA0, DATA1; Data can be further specified to trigger on ≤, <, =, >, ≥, ≠ a particular data value, or inside or outside of a range.

   Handshake Packet – Any handshake type, ACK, NAK, STALL.

   Special Packet – Any special type, Reserved.

   Error – PID Check, CRC5, CRC16, Bit Stuffing.

Full-speed: Trigger/Search on Sync, Reset, Suspend, Resume, End of Packet, Token (Address) Packet, Data Packet, Handshake Packet, Special Packet, Error.

   Token Packet – Any token type, SOF, OUT, IN, SETUP; Address can be further specified to trigger on ≤, <, =, >, ≥, ≠ a particular value, or inside or outside of a range. Frame number can be specified for SOF token using Binary, Hex, Unsigned Decimal, and Don't Care digits.

   Data Packet – Any data type, DATA0, DATA1; Data can be further specified to trigger on ≤, <, =, >, ≥, ≠ a particular data value, or inside or outside of a range.

   Handshake Packet – Any handshake type, ACK, NAK, STALL.

   Special Packet – Any special type, PRE, Reserved.

   Error – PID Check, CRC5, CRC16, Bit Stuffing.

High-speed: Trigger/Search on Sync, Reset, Suspend, Resume, End of Packet, Token (Address) Packet, Data Packet, Handshake Packet, Special Packet, Error.

   Token Packet – Any token type, SOF, OUT, IN, SETUP; Address can be further specified to trigger on ≤, <, =, >, ≥, ≠ a particular value, or inside or outside of a range. Frame number can be specified for SOF token using Binary, Hex, Unsigned Decimal, and Don't Care digits.

   Data Packet – Any data type, DATA0, DATA1, DATA2, MDATA; Data can be further specified to trigger on ≤, <, =, >, ≥, ≠ a particular data value, or inside or outside of a range.

   Handshake Packet – Any handshake type, ACK, NAK, STALL, NYET.

   Special Packet – Any special type, ERR, SPLIT, PING, Reserved. SPLIT packet components that can be specified include:

      Hub Address

      Start/Complete – Don't Care, Start (SSPLIT), Complete (CSPLIT)

      Port Address

      Start and End bits – Don't Care, Control/Bulk/Interrupt (Full-speed Device, Low-speed Device), Isochronous (Data is Middle, Data is End, Data is Start, Data is All)

      Endpoint Type – Don't Care, Control, Isochronous, Bulk, Interrupt

   Error – PID Check, CRC5, CRC16.

DPO4ENET Ethernet Triggering and Analysis Test Characteristics

Bus Setup Options

Option

Description

Ethernet Compatibility

10BASE-T, 100BASE-TX

Sources

Single-ended:

   Analog channels 1-4

Differential:

   Analog channels 1-4

   Math channel

   Reference channels 1-4

Recommended Probing

10BASE-T: Single-ended or differential

100BASE-TX: Differential

Thresholds Presets

10BASE-T: Single-ended (D+ 1.25 V; D– 1.25 V); Differential (High 1.25 V; Low –1.25 V)

100BASE-TX: Single-ended (D+ 500 mV; D– 500 mV); Differential (High 500 mV; Low –500 mV)

Decode Formats Available

Mixed1: Data is shown in Hex, all other fields are shown in either Decimal or Hex

Mixed2: Data is shown in ASCII, all other fields are shown in either Decimal or Hex

Hex: all fields

Binary: all fields

Bus Decode

Characteristic

Description

Ethernet Data Rates

10BASE-T: 10 Mb/s

100BASE-TX: 100 Mb/s

Decode Display

Start (green bar)

MAC Address (yellow packet)

Data (cyan packet)

IPv4 Header (white packet)

TCP Header (brown packet)

CRC (purple packet)

Stop (red bar)

Error (red packet)

Internet Protocol Support

IPv4

Transport Layer Protcol Support

TCP

Display Modes

Mode

Description

Bus

Bus only

Bus and Waveforms

Simultaneous display of bus and logic waveforms

Event Table

Decoded packet data in a tabular view


DPO4ENET triggering on a specific 10BASE-T MAC source address.


Color-coded DPO4ENET display of 100BASE-TX.


DPO4ENET 100BASE-TX decoded Event Table showing all packet information.

Bus Trigger Options

Option

Description

Trigger and/or Search On

10BASE-T:

   Start Frame Delimiter

   MAC Addresses: Trigger on Source and Destination 48-bit address values

   MAC Q-tag Control Information: Trigger on Q-tag 32-bit value

   MAC Length/Type: Trigger on ≤, <, =, >, ≥, ≠ a particular 16-bit value, or inside or outside of a range

   MAC Client Data: Trigger on ≤, <, =, >, ≥, ≠ a particular 16-bit value, or inside or outside of a range. Selectable number of bytes to trigger on from 1-16. Byte offset options of Don't Care, 0-1499

   IP Header: Trigger on IP header 8-bit value, Source Address, Destination Address

   TCP Header: Trigger on Destination Port, Source Port, Sequence Number, and Ack Number

   TCP/IPv4 Client Data: Trigger on ≤, <, =, >, ≥, ≠ a particular data value, or inside or outside of a range. Selectable number of bytes to trigger on from 1-16. Byte offset options of Don't Care, 0-1499

   End of Packet

   FCS (CRC) Error

 

100BASE-TX:

   Start Frame Delimiter

   MAC Addresses: Trigger on Source and Destination 48-bit address values

   MAC Q-tag Control Information: Trigger on Q-tag 32-bit value

   MAC Length/Type: Trigger on ≤, <, =, >, ≥, ≠ a particular 16-bit value, or inside or outside of a range

   MAC Client Data: Trigger on ≤, <, =, >, ≥, ≠ a particular data value, or inside or outside of a range. Selectable number of bytes to trigger on from 1-16. Byte offset options of Don't Care, 0-1499

   IP Header: Trigger on IP header 8-bit value, Source Address, Destination Address

   TCP Header: Trigger on Destination Port, Source Port, Sequence Number, and Ack Number

   TCP/IPv4 Client Data: Trigger on ≤, <, =, >, ≥, ≠ a particular data value, or inside or outside of a range. Selectable number of bytes to trigger on from 1-16. Byte offset options of Don't Care, 0-1499

   End of Packet

   FCS (CRC) Error

   Idle

Ordering Information

All modules enable triggering on packet-level information as well as analytical tools such as digital views of the signal, bus views, packet decoding, search tools, and packet decode tables with time stamp information.

   

Current Products

Discontinued Products

Serial Bus

MDO/MSO/DPO4000B Series Module

MDO3000 Series Module

MSO/DPO2000B Series Module

MDO4000 Series Module

MSO/DPO4000 Series Module*4

MSO/DPO3000 Series Module

MSO/DPO2000 Series Module

I2C, SPI*5

DPO4EMBD

MDO3EMBD

DPO2EMBD

DPO4EMBD

DPO4EMBD

DPO3EMBD

DPO2EMBD

RS-232 / 422 / 485 / UART

DPO4COMP

MDO3COMP

DPO2COMP

DPO4COMP

DPO4COMP

DPO3COMP

DPO2COMP

CAN, LIN

DPO4AUTO

MDO3AUTO

DPO2AUTO

DPO4AUTO

DPO4AUTO

DPO3AUTO

DPO2AUTO

FlexRay

--

MDO3FLEX

--

--

--

DPO3FLEX

--

CAN, LIN, FlexRay

DPO4AUTOMAX*6

--

--

DPO4AUTOMAX*6

DPO4AUTOMAX*6

--

--

I2S/LJ/RJ/TDM*7

DPO4AUDIO

MDO3AUDIO

--

DPO4AUDIO

DPO4AUDIO

DPO3AUDIO

--

MIL-STD-1553

DPO4AERO

MDO3AERO

--

DPO4AERO

DPO4AERO

DPO3AERO

--

USB*8

DPO4USB

MDO3USB

--

DPO4USB

DPO4USB

DPO3USB

--

Ethernet*9

DPO4ENET

--

--

DPO4ENET

--

--

--

 

*4For DPO4000 (non-B) Series with serial numbers lower than C020000 and no serial triggering hardware update installed, 2-wire SPI, RS-232/422/485/UART parity error, LIN, FlexRay, and I2S/LJ/RJ/TDM triggers are not supported.

*5 SPI support is limited to 2-wire SPI only on models that have only 2 analog channels and no digital channels.

*6 DPO4AUTOMAX includes a PC-based software package for FlexRay eye diagram analysis.

*7 Not available on models that have only 2 analog channels and no digital channels.

*8 USB LS/FS triggering and decode available on all models in all indicated product families. HS decode available only on 1 GHz models. HS triggering only available on 1 GHz models in MDO/MSO/DPO4000B and MDO4000 Series.

*9 100BASE-TX requires ≥ 350 MHz model.

Recommended Probes

Please refer to www.tek.com/probes for further information on the recommended models of probes and any necessary probe adapters.

Select Service

X

STAY INFORMED: Events & Seminars | Email Newsletter | Follow Tektronix on Twitter Follow Tektronix on Facebook Follow Tektronix on Google+ Follow Tektronix on Youtube

MEMBERSHIP: Create an account for exclusive membership privileges. Login