High-voltage Differential Probes Datasheet

TMDP0200 • THDP0200 • THDP0100 • P5200A • P5202A • P5205A • P5210A

Features & Benefits

Bandwidths up to 200 MHz
Up to 6000 V Differential (DC + pk AC)
Up to 2300 V Common (RMS)
Overrange Indicator
Safety Certified
Switchable Attenuation
Switchable Bandwidth Limit

Applications

Floating Measurements
Switching Power Supply Design
Motor Drive Design
Electronic Ballast Design
CRT Display Design
Power Converter Design and Service
Power Device Evaluation

Safe High-voltage Probe Solutions

Tektronix offers a broad portfolio of high-voltage probing solutions that enable users to safely and accurately make floating measurements.

The THDP0100 and P5210A have the largest differential dynamic range capability from Tektronix, allowing users to safely measure up to ±6000 V. The THDP0100 supports bandwidths up to 100 MHz and slew rates up to 2500 V/ns at 1/1000 gain. These probes are supplied with two sizes of hook tips and have an overrange visual and audible indicator which warns the user when they are exceeding the linear range of the probe.

The THDP0200 and P5205A are active differential probes that are capable of safely measuring differential voltages up to ±1500 V. The probes are effective in making measurements in IGBT circuits such as motor drives and power converters. The THDP0200 supports bandwidths up to 200 MHz and slew rates up to 275 V/ns at 1/250 gain.

The TMDP0200 and P5202A are designed for medium-voltage applications with differential requirements up to ±750 V. These probes have lower attenuation ranges and offer better signal-to-noise ratio.

The P5200A can be used with any oscilloscope and enables users to safely make measurements of floating circuits with their oscilloscope grounded. The P5200A Active Differential Probe converts floating signals to low-voltage ground-referenced signals that can be displayed safely and easily on any ground-referenced oscilloscope.

WARNING: For safe operation, do not use the P5200A High-voltage Differential Probe with oscilloscopes that have floating inputs (isolated inputs), such as the Tektronix TPS2000 and THS3000 Series oscilloscopes. The P5200A High-voltage Differential Probe requires an oscilloscope or other measurement instrument with grounded inputs.

Connectivity Options

The TMDP and THDP Series probes are equipped with the TekVPI^® interface which allows smart communication between the oscilloscope and probe. Pushing the probe menu button will launch the probe control menu on the oscilloscope display providing access to all relevant probe settings and controls. These probes are designed to operate on TekVPI^® oscilloscopes without requiring the TPA-BNC adapter.

The P52xxA Series probes are equipped with the Tektronix TekProbe^® interface which communicates scale information to the oscilloscope. Direct connections can be made to oscilloscopes configured with the TekProbe^® interface or to any oscilloscope when used with the 1103 TekProbe^® Power Supply.

Characteristics

Probes with the TekVPI^® Interface

Characteristic	TMDP0200	THDP0200	THDP0100
Attenuation	25X / 250X	50X / 500X	100X / 1000X
Differential Voltage	250X: ±750 V 25X: ±75 V	500X: ±1500 V 50X: ±150 V	1000X: ±6000 V 100X: ±600 V
Common Mode Voltage	±750 V	±1500 V	±6000 V
Maximum Input Voltage-to-Earth	550 V CAT I 300 V CAT III	1000 V CAT II 600 V CAT III	2300 V CAT I 1000 V CAT III
Bandwidth	200 MHz	200 MHz	100 MHz
Rise Time	<1.8 ns	<1.8 ns	<3.5 ns
Slew Rate	<275 V/ns at 1/250 gain	<650 V/ns at 1/500 gain	<2500 V/ns at 1/1000 gain
Input Impedance at the Probe Tip	5 MΩ \|\| <2 pF	10 MΩ \|\| <2 pF	40 MΩ \|\| <2.5 pF
Typical CMRR	DC: > –80 dB 100 kHz: > –60 dB 3.2 MHz: > –30 dB 100 MHz: > –26 dB	DC: > –80 dB 100 kHz: > –60 dB 3.2 MHz: > –30 dB 100 MHz: > –26 dB	DC: > –80 dB 100 kHz: > –60 dB 3.2 MHz: > –30 dB 100 MHz: > –26 dB
Cable Length	1.5 m	1.5 m	1.5 m

Probes with the TekProbe^® Interface

Characteristic	P5200A	P5202A	P5205A	P5210A
Attenuation	50X / 500X	20X / 200X	50X / 500X	100X / 1000X
Differential Voltage	500X: ±1300 V 50X: ±130 V	200X: ±640 V 20X: ±64 V	500X: ±1300 V 50X: ±130 V	1000X: ±5600 V 100X: ±560 V
Common Mode Voltage	±1300 V	±640 V	±1300 V	±5600 V
Maximum Input Voltage-to-Earth	1000 V CAT II	450 V CAT l 300 V CAT ll	1000 V CAT II	2300 V CAT l 1000 V CAT III
Bandwidth	50 MHz	100 MHz	100 MHz	50 MHz
Differential Input Impedance	10 MΩ, 2 pF	5 MΩ, 2 pF	10 MΩ, 2 pF	40 MΩ, 2.5 pF
Input Impedance between each Input and Ground	5 MΩ, 4 pF	2.5 MΩ, 4 pF	5 MΩ, 4 pF	20 MΩ, 5 pF
Typical CMRR	DC: >80 dB 100 kHz: >60 dB 3.2 MHz: >30 dB 50 MHz: >26 dB	DC: >80 dB 100 kHz: >60 dB 3.2 MHz: >40 dB 50 MHz: >30 dB
Cable Length	1.8 m

1. This is the maximum measurable range between the (+) and (–) input leads of the probe. Beyond these limits, the output could be clipped.2. The maximum common mode voltage and maximum input voltage-to-earth (RMS) are the maximum voltages that each input lead (+/–) can be from ground.

Ordering Information

P5200A, P5202A, and P5205A

High-voltage Differential Probe.

Includes: 2 hook clips (AC280-FL), 2 pincer clips (AC283-FL), 2 alligator clips (AC285-FL), and 2 extension cables (196-3523-00).

Note: Please specify power cord option when ordering.

Power Plug Options (P5200A only)

Option	Description
Opt. A0	US power
Opt. A1	Euro power
Opt. A2	UK power
Opt. A3	Australian power
Opt. A5	Switzerland power
Opt. A6	Japanese power
Opt. A10	China power
Opt. A11	India power
Opt. A12	Brazil power

TMDP0200 and THDP0200

High-voltage Differential Probes.

Includes: 2 hook clips (AC280-FL), 2 pincer clips (AC283-FL), 2 alligator clips (AC285-FL), 2 extension cables (196-3523-00), 2 test leads (TP175-FL), 1 high-voltage differential browser (THV-BROWSER), and 1 probe holder (TPH1000).

THDP0100 and P5210A

High-voltage Differential Probes.

Includes: 2 probe tips, 2 large hook clips; 2 small hook clips; 2 probe heads (re-order kit number 020-3070-00).

Service Options

Option	Description
Opt. C3	Calibration Service 3 Years
Opt. C5	Calibration Service 5 Years
Opt. D1	Calibration Data Report
Opt. D3	Calibration Data Report 3 Years (with Opt. C3)
Opt. D5	Calibration Data Report 5 Years (with Opt. C5)
Opt. R3	Repair Service 3 Years
Opt. R5	Repair Service 5 Years
Opt. SILV200	Standard Warranty Extended to 5 Years

196-3523-00: Extender Leads (1.5 m).

AC280-FL: Hook Clips.

AC283-FL: Pincer Clips.

AC285-FL: Alligator Clips.

020-3070-00: Hook Clip Kit.

Probe and Accessory Derating Table (Common Mode, relative to ground, when used with P52xxA Series probes)

Accessory	Description	TMDP0200 / P5202A 450 V CAT I 300 V CAT II	THDP0200 / P5200A / P5205A 1000 V CAT II 600 V CAT III	THDP0100 / P5210A 2300 V CAT I 1000 V CAT III
196-3523-00	2x Extender Leads (1.5 m) 2300 V CAT I 1000 V CAT III	Standard 450 V CAT I 300 V CAT II	Standard 1000 V CAT II 600 V CAT III	Standard 2300 V CAT I 1000 V CAT III
AC280-FL	2x Hook Clips 1000 V CAT III 600 V CAT IV	Standard 450 V CAT I 300 V CAT II	Standard 1000 V CAT II 600 V CAT III	Optional 1000 V CAT I 1000 V CAT III
AC283-FL	2x Pincer Clips 1000 V CAT III 600 V CAT IV	Standard 450 V CAT I 300 V CAT II	Standard 1000 V CAT II 600 V CAT III	Optional 1000 V CAT I 1000 V CAT III
AC285-FL	2x Alligator Clips 1000 V CAT III 600 V CAT IV	Standard 450 V CAT I 300 V CAT II	Standard 1000 V CAT II 600 V CAT III	Optional 1000 V CAT I 1000 V CAT III
020-3070-00	Hook Clip Kit 2300 V CAT I 1000 V CAT II	Optional 450 V CAT I 300 V CAT II	Optional 1000 V CAT II 600 V CAT II	Standard 2300 V CAT I 1000 V CAT II
TP175-FL	2x Test Leads 1000 V CAT III 600 V CAT IV	Standard (TMDP0200) 550 V CAT I 300 V CAT III	Standard (THDP0200) 1000 V CAT II 600 V CAT III	Optional 2300 V CAT I 1000 V CAT III

Accessory

Description

TMDP0200 / P5202A

450 V CAT I

300 V CAT II

THDP0200 / P5200A / P5205A

1000 V CAT II

600 V CAT III

THDP0100 / P5210A

2300 V CAT I

1000 V CAT III

196-3523-00

2x Extender Leads (1.5 m)

2300 V CAT I

1000 V CAT III

Standard

450 V CAT I

300 V CAT II

Standard

1000 V CAT II

600 V CAT III

Standard

2300 V CAT I

1000 V CAT III

AC280-FL

2x Hook Clips

1000 V CAT III

600 V CAT IV

Standard

450 V CAT I

300 V CAT II

Standard

1000 V CAT II

600 V CAT III

Optional

1000 V CAT I

1000 V CAT III

AC283-FL

2x Pincer Clips

1000 V CAT III

600 V CAT IV

Standard

450 V CAT I

300 V CAT II

Standard

1000 V CAT II

600 V CAT III

Optional

1000 V CAT I

1000 V CAT III

AC285-FL

2x Alligator Clips

1000 V CAT III

600 V CAT IV

Standard

450 V CAT I

300 V CAT II

Standard

1000 V CAT II

600 V CAT III

Optional

1000 V CAT I

1000 V CAT III

020-3070-00

Hook Clip Kit

2300 V CAT I

1000 V CAT II

Optional

450 V CAT I

300 V CAT II

Optional

1000 V CAT II

600 V CAT II

Standard

2300 V CAT I

1000 V CAT II

TP175-FL

2x Test Leads

1000 V CAT III

600 V CAT IV

Standard (TMDP0200)

550 V CAT I

300 V CAT III

Standard (THDP0200)

1000 V CAT II

600 V CAT III

Optional

2300 V CAT I

1000 V CAT III

The P52xxA Series probes provide high-voltage differential measurement solutions for any oscilloscope.

High-voltage Differential Probes Datasheet

Configure & Quote

Select Model

MORE INFORMATION:

Download File

(606.27 KB)