High-performance Differential Probes

P7350 • P7330 • P6330

Features & Benefits

<100 ps Rise Time (P7350 guaranteed)
5 GHz to 3.5 GHz Bandwidths (typical)
Low Input Capacitance:

<0.3 pF Differential (P7350 typical)

≥60 dB (1000:1) Common Mode Rejection Ratio (CMRR) at 1 MHz (P7330, P6330 typical)
Small Probe Head Allows Easy Probing of SMDs

Applications

Communications (Gigabit Ethernet, Fibre Channel, InfiniBand)
Semiconductor Characterization and Validation

PCI Express
Serial ATA
IEEE 1394
USB 2.0 (The P7350 is not recommended for USB 2.0 compliance testing)
RAMBUS
DDR

Disk Drive Design

Tektronix’ proven expertise in probes brings you the highest fidelity in high-speed differential probing. The P7350, P7330, and P6330 high-bandwidth differential probes offer excellent signal fidelity, meeting the needs of engineers in design and debug of technologies with very fast clock speeds and edge rates. They provide high-bandwidth, low circuit loading, low-noise differential probing solutions for high-speed circuit designers.

P7350

The P7350 improves usability with variable spacing and solder-down capability, and a small form factor for ease of use on densely packed circuit boards with difficult-to-reach probe points. It employs the patented TekConnect^® interface, which preserves signal integrity to 10 GHz and beyond to meet present and future bandwidth needs.

P7330 and P6330

The P7330 and P6330 enable users to make time-domain or frequency-domain measurements on high-bandwidth signals commonly found in digital IC designs, communication applications, and disk drive applications. The P7330 and P6330 provide high-bandwidth, low circuit loading, and low-noise differential probing solutions. The small probe head geometry and assorted probe tip accessories allow these probes to easily accommodate manual probing of surface-mount devices.

Performance You Can Count On

Depend on Tektronix to provide you with performance you can count on. In addition to industry-leading service and support, this product comes backed by a one-year warranty as standard.

Characteristics

Characteristic	P7350	P7330	P6330
Rise Time	<100 ps (guaranteed)	<140 ps (guaranteed)	<140 ps (guaranteed)
Bandwidth	5.0 GHz	3.5 GHz	3.5 GHz
Attenuation	6.25x	5x	5x
Differential Input C	<0.3 pF (typical)
Differential Input Resistance	100 kΩ	100 kΩ	100 kΩ
Differential Input Range	±2.5 V (20 °C to 30 °C)	±2 V (20 °C to 30 °C)	±2 V (20 °C to 30 °C)
Common Mode Input Range	+6.25 V to -5 V	+5 V to -4 V	+5 V to -4 V
Max Voltage (nondestruct)	±25 V (DC + peak AC)	±25 V (DC + peak AC)	±25 V (DC + peak AC)
CMRR	>45 dB at 1 MHz (typical)	>60 dB at 1 MHz (typical)	>60 dB at 1 MHz (typical)
Noise	Approx. 46 nV/root Hz	Approx. 35 nV/root Hz	Approx. 35 nV/root Hz
Interface	TekConnect	TekConnect	TEKPROBE II BNC
Cable Length	1.3 m	1.3 m	1.3 m

Ordering Information

P7350

5.0 GHz Differential Probe for TekConnect Interface.

Supports CSA/TDS8200, CSA/TDS8000, TDS/CSA7000/B, and TDS6000/B/C Series.*¹

P7330

3.5 GHz Differential Probe for TekConnect Interface.

Supports CSA/TDS8200, CSA/TDS8000, TDS/CSA7000/B, and TDS6000/B/C Series.*¹

P6330

3.5 GHz Differential Probe for TEKPROBE^® BNC Interface.

Supports TDS/CSA7000/B, TDS6000/B/C, TDS700, TDS600 Series.*²

All Include: One-year warranty, plus see Accessories table below.

*¹ CSA/TDS8200, CSA/TDS8000 Series requires the use of the 80A03 TekConnect Interface Adapter.

*² TDS6000/B/C or TekConnect TDS7000/B Series oscilloscopes require a TCA-BNC adapter.

Accessories

Accessory	P7350		P7330		P6330
Accessory	Part No.	Quantity	Part No.	Quantity	Part No.	Quantity
Y Lead Adapter	196-3434-xx	2 each	196-3434-xx	2 each	196-3434-xx	2 each
3 in. Ground Lead	196-3469-xx	2 each	196-3469-xx	2 each	196-3469-xx	2 each
SMT KlipChip™ Adapter	206-0364-xx	2 each	206-0364-xx	2 each	206-0364-xx	2 each
TwinFoot™ Adapter (Pkg of 2)	016-1785-xx	1 pkg	016-1785-xx	1 pkg	016-1785-xx	1 pkg
Square Pin Adapter (Pkg of 4)	016-1884-xx	1 pkg	016-1884-xx	1 pkg	016-1884-xx	1 pkg
Plastic Accessory Box	006-7164-xx	1	006-7164-xx	1	006-7164-xx	1
Coding Color Marker Kit	016-1886-xx	1	–	–	–	–
Color-coding Clips	–	–	016-1315-xx	1 set	016-1315-xx	1 set
Variable Spacing Adapter (pkg of 4)	016-1885-xx	1 pkg	016-1885-xx	1 pkg	016-1885-xx	1 pkg
Probe Carrying Case	016-1879-xx	1	016-1879-xx	1	016-1879-xx	1
Instruction Manual	071-1238-xx	1	071-0758-xx	1	071-0757-xx	1
Certificate of Traceable Calibration	–	1	–	1	–	1
Antistatic Wrist Strap	006-3415-04	1	006-3415-04	1	006-3415-04	1
Pin Jumper Lead	196-3473-xx	2	196-3473-xx	2	196-3473-xx	2
Solder In Kit	020-2505-xx	1	–	–	–	–