- Home
- Products
- Oscilloscopes
- Logic Analyzers
- Protocol Analyzers
- Bit Error Rate Testers
- Signal Generators
- Spectrum Analyzers
- Probes and Accessories
- Baseband Video Test Solutions
- MPEG Video Test Solutions
- Video Quality and Service Assurance
- Digital Multimeters
- DC Power Supplies
- Frequency Counters and Timers
- RF Power Meters
- Embedded Instrumentation
- Optical Modulation Analyzer
- Tektronix Communications
- Tektronix Components
- Applications
- Service
- Support
- Purchase
- About Us
- My Account
Buffered Passive Probe
P6339A
The following products have been replaced by newer models:
Product Models:
P6339A
Features & Benefits
- 300 VRMS CAT II Maximum Input Voltage
- 8 pF Input Capacitance
- 10 MΩ Input Resistance
- Scope Controlled Parameters
- Connects to TEKPROBE™ III Interface Instruments
- Compact Probe Tip Compatible with a Wide Range of Tektronix Accessories and Adapters
- TEKPROBE III Interface Allows Control of Key Probe Parameters
- Input Gain
- AC/DC Coupling
- Bandwidth Limiting
- DC Offset
Applications
- General Purpose
- Digital Design
- Power Device Characterization
- Mixed Signal
Designed for TEKPROBE III, TDS794D and TDS694C
The P6339A 500 MHz Buffered Passive Probe is a revolutionary leap in probe technology. The P6339A's wide dynamic range makes it ideal for general purpose measurement applications.
To facilitate SMD probing, the P6339A comes standard with a set of SureFoot® adapters. The compact probe head/tip assembly is compatible with the full line of 3.5 mm (compact) accessories. The P6339A probe is designed exclusively for the TDS794D and TDS694C instruments.
Characteristics
Warranted Specifications
Maximum Input Voltage - 300 VRMS CAT II.
Voltage Sensitivity - 10 mV/div to 100 V/div in a 1, 2, 5 sequence.
DC Attenuation Accuracy - ±4%.
Output Offset - ≤±5 mV.
Typical Specifications
Bandwidth - DC to 500 MHz.
Rise Time - 700 ps.
Input C - 8 pF.
Input R - 10 MΩ.
Bandwidth Limit - Selectable 20 MHz and 150 MHz.
Coupling - AC/DC, <10 Hz Cutoff.
Output Termination - TEKPROBE™ III interface/50 Ω termination.
Physical Characteristics
Probe Tip/Head Style - 3.5 mm/Compact.
Output Cable Length - 1.3 m.
Environmental Characteristics
Temperature - Operating: +10 °C to +40 °C (+50 °F to +104 °F).
Safety - UL3111-2-031, CSAS1010.2.031, EN61010-2-031, IEC61010-2-031.
Compatible Instruments
TDS794D, TDS694C.
Figure 1. P6339A input impedance.
Figure 2. P6339A input phase.
Figure 3. SMK4 Micro KlipChip™ adapter.
Figure 4. SF200A Series SureFoot® adapters.
|
|
Product(s) are manufactured in ISO registered facilities.
|
60W-12025-0b
Last Modified: 2004-05-27 07:00:00
