[field_product_series-title-raw] TekVPI Deskew Pulse Generator Signal Source

Features & Benefits

An Easy-to-use, Plug-on Accessory for Oscilloscopes That Feature the TekVPI Interface
Generates Source Signals to Enable Precise Deskew Between Current and Voltage Probes in Power Measurement Applications
LED Status Indicator for Quick Identification of Generator State
Multiple Output Signals Enable Use with a Variety of Oscilloscopes and Probes
Output can be Turned Off to Reduce Power Consumption when Not in Use
Easy Access to Oscilloscope Menu Display to Control Settings from the Oscilloscope Front Panel

Applications

Power Supply Design
Measurements Requiring Accurate Timing Measurements Between Channels

TEK-DPG Deskew Pulse Generator

The TEK-DPG Deskew Pulse Generator is a signal-generating accessory for Tektronix instruments that feature the TekVPI™ interface, including DPO3000 Series and DPO/MSO4000 Series oscilloscopes.

The TEK-DPG generator provides a source signal to the Power Measurement Deskew Fixture (Tektronix part number 067-1686-xx), used to deskew popular Tektronix probes. The generator and deskew fixture allow you to precisely deskew the time differences between instrument channels of current and voltage probes, necessary when you are using the probes in power measurement applications.

Characteristics

Mode	Amplitude	Frequency	Rise Time
Mode	(all values are Typical)
Mode 1	1 V_p-p (-1 V..0 V)	1 kHz	0.8 ns
Mode 2	2 V_p-p (-2 V..0 V)	1 kHz	1.6 ns
Mode 3	2 V_p-p (-1 V..+1 V)	1 MHz	2 ns
Mode 4	8 V_p-p (-4 V..+4 V)	1 MHz	4 ns

Terminates Into - 50 Ω

Expected Load - 50 Ω

Status LED Values

Status LED Color	Description
Amber	The generator is powered and the output at the BNC cable is not enabled. This is the default status at power-on
Green	The generator is powered and the output at the BNC cable is enabled
Red	A fault condition may have occurred. Disconnect and reconnect the generator to clear the fault condition

Recommended Output Mode

Probe*¹	Operation	TEK-DPG Output Mode*²	067-1686-xx Input Port
The recommended output mode is determined by the combination of oscilloscope model, voltage probe, and current probe, according to the following table. See the user instructions for the Power Measurement Deskew Fixture, Tektronix part number 067-1686-xx, for deskew fixture operation.
Passive Voltage Probes
P6139A, P5050, and Other 10x Passive Probes	Compensate timing with respect to current probes	DPO3000: Mode 2 DPO/MSO4000: Mode 1	A or B, depending on current probe type
Active Voltage Probes
TAP1500, TAP2500, TAP3500 TDP0500, TDP1000, TDP1500 P6243, P6245, P6246, P6247, P6248, P6250, P6251	Compensate timing with respect to current probes	DPO3000: Mode 2 DPO/MSO4000: Mode 1	A or B, depending on current probe type
High-voltage Probes
P5200, P5205, P5210 P6135A	Compensate timing with respect to current probes	DPO3000: Mode 2 or 4³ DPO/MSO4000 : Mode 1 or 4³	A or B, depending on current probe type
Small Current Probes
TCP0030 TCP202, TCP312, TCP305 A6302, A6312	Compensate timing with respect to voltage probes	DPO3000: Mode 2 or 4³ DPO/MSO4000: Mode 1 or 4³	A
Large Current Probes
TCP0150 TCP303 A6303	Compensate timing with respect to voltage probes	DPO3000: Mode 4 DPO/MSO4000: Mode 4	B

*¹ Note that some probe models listed do not utilize the TekVPI interface. Probes which use the TekProbe-BNC interface require the TPA-BNC adapter to connect to a TekVPI oscilloscope.

*² TEK-DPG is not supported by the DPO7000 Series. The Probe Calibration output from the DPO7000 Series generates the appropriate source signal for the Power Measurement Deskew Fixture.

*³ Mode 4 is a universal mode for high attenuation probes. High-voltage probes and current probes can always use Mode 4.

Physical Characteristics

Dimensions	cm	in.
Height	3.048	1.20
Width	4.064	1.60
Length	11.73	4.62
Cable Length	41.225	16.2
Weight	kg	lb.
Shipping	0.325	0.7175

Power Requirements

TEK-DPG is powered directly from DPO3000, DPO/MSO4000, and DPO7000 Series Oscilloscopes, using the TekVPI probe interface.

Environmental

Characteristic	Description
Temperature
Operating	0 °C to +50 °C
Nonoperating	-40 °C to +71 °C
Humidity
Operating	5% to 90% relative humidity (% RH) at up to +40 °C 5% to 60% RH above +40 °C up to +50 °C, noncondensing
Nonoperating	5% to 90% RH (relative humidity) at up to +40 °C 5% to 60% RH above +40 °C up to +50 °C, noncondensing
Altitude
Operating	Up to 3000 meters (9,843 feet)
Nonoperating	Up to 12,000 meters (39,370 feet)
Regulatory
Emissions Compliance	EN 55011, Class A
EMC Compliance	EN61326, Class A
Compliance Labeling	WEEE (European Union)

Standard Warranty

One-year parts and labor.

Recommended Oscilloscopes

DPO3000 and DPO/MSO4000 Series Oscilloscopes with TekVPI probe interface.
TEK-DPG is not supported by the DPO7000 Series Oscilloscopes, as these models provide the appropriate source signal at the Probe Calibration output on the front-panel BNC connector.

Ordering Information

TEK-DPG

TEK-DPG Deskew Pulse Generator Signal Source

Includes: User manual (071-2341-xx).

Recommended Accessories

Tektronix Power Deskew/Calibration Fixture - (067-1686-xx).

Service Options

Option	Description
R3	Repair Service 3 Years
R5	Repair Service 5 Years
SILV600	Standard Warranty Extended to 5 Years
Additional Service Products Available During Warranty (DW)or Post Warranty (PW)
TEK-DPG-R1PW	Repair service coverage 1-year post warranty
TEK-DPG-R2PW	Repair service coverage 2-year post warranty
TEK-DPG-R3DW	Repair service coverage 3 years (includes product warranty period). 3-year period starts at time of customer instrument purchase
TEK-DPG-R5DW	Repair service coverage 5 years (includes product warranty period). 5-year period starts at time of customer instrument purchase

TekVPI Deskew Pulse Generator Signal Source

TEK-DPG

Features & Benefits

Applications

TEK-DPG Deskew Pulse Generator

Characteristics

Ordering Information

TEK-DPG

Select Model

MORE INFORMATION: