USB 3.0 Test Solutions
Introduction to SuperSpeed USB
| Recommended Equipment for USB3.0 | Transmitter | Receiver | Channel | |
|---|---|---|---|---|
| Real Time Oscilloscope | DPO/DSA71254B or higher | 1 | 1 | |
| High Speed Signal Source*1 | Arbitrary Waveform Generator - AWG7122B with options 6,8 | 1 | ||
| Sampling Oscilloscope | DSA8200 Sampling Oscilloscope | 1 | ||
| Sampling Modules | 80E08 TDR Module | 2 | ||
| Software*1 | IConnect TDR and S-Parameter measurement software (80SSPAR) for DSA8200 Sampling Oscilloscope | 1 | ||
| Protocol Trigger and Decode software for DPO/DSA70000B Series (Opt. PTD) | 1 | |||
| DPOJET Jitter and Eye Diagram Analysis Tool for DPO/DSA70000B Series (option DJA)*2 USB 3.0 Test Solution for Transmitter Test (option USB3)*3 USB 3.0 TekExpress Automated Test Solution (option USB-TX)*4 |
1 | |||
| SerialXpress® (SDX100 with options ISI and SSC) - Advanced Jitter Generation Tool for AWG | 1 | |||
| Protocol Analysis and Compliance Testing | Ellisys USB Explorer 280 | |||
| Test fixtures*5 | For Host Testing:: TF-USB3-A-P used for best signal quality or for more mechanical flexibility use TF-USB3-B-R (includes a 13cm USB 3.0 Cable - P/N 174-5772-00). For precision De-Embed of TF-USB3-A plug fixture, order TF-USB3-AB-KIT (includes Cal Kit). See Host Test Setup at right. |
1 | 1 | |
| For Device Testing: TF-USB3-A-R (includes short USB 3.0 Cable). See Device Test Setup at right. |
1 | 1 | ||
| For Cable Testing: TF-USB3-AB-KIT (USB 3.0 Type A to Type B Short Cable, USB 3.0 Calibration Board, A Plug Fixture (TF-USB3-A-P), A Receptacle Fixture (TF-USB3-A-R), B Receptacle Fixture (TF-USB3-B-R)) |
1 | |||
*1 Tektronix offers a large selection of Software packages and options for different serial technologies applications. The exact solution including all options and probing requirements is depending on the configuration of the device to be tested. Please have an Account Manager contact you to configure the exact solution.
*2DPOJET software is standard on the DSA70000B Series and optional on the DPO70000B Series
*3 Includes USB 3.0 measurement library for DPOJET
*4 Provides full transmitter automation including normative and informative measurements with custom test reports, requires option TEKEXP
*5Please contact your Account Manager for availability
