Recommended Equipment for Ethernet Testing
Required for Ethernet 10 Base T Compliance Tests
Required for Ethernet 100 Base T Compliance Tests
| Recommended Equipment |
Quantity |
| Real-time Oscilloscope |
DPO7000 or higher or DSA/DPO70000B Series Real-time Oscilloscope |
1 |
| Ethernet Compliance Software |
TDSET3 compliance software (option ET3) |
1 |
| Active Differential Probe |
P6247 or P6248 Series Differential Probes*1 |
2 |
| Signal Generator |
Ethernet Test Return Loss Stimulus |
1 |
| Compliance Test Fixture |
- Basic Test package (TF-GBE-BTP) - consists of test fixture PCB set and RJ45 interconnect cable
- Advanced Test Package (TF-GBE-ATP) - consists of test fixture PCB set, RJ45 interconnect cable and 1000BaseT jitter test channel cable
|
1 |
Required for Ethernet 1000 Base T Compliance Tests
| Recommended Equipment |
Quantity |
| Real-time Oscilloscope |
DPO7104 or higher or DSA/DPO70000B Series Real-time Oscilloscope |
1 |
| Ethernet Compliance Software |
TDSET3 compliance software (option ET3) |
1 |
| Active Differential Probe |
P6247 or P6248 Series Differential Probes*1 |
2 |
| Signal Generator |
Ethernet Test Disturber Signal Generation and Return Loss Stimulus |
1 |
| Compliance Test Fixture |
- Basic Test package (TF-GBE-BTP) - consists of test fixture PCB set and RJ45 interconnect cable
- Advanced Test Package (TF-GBE-ATP) - consists of test fixture PCB set, RJ45 interconnect cable and 1000BaseT jitter test channel cable
|
1 |
Required for Ethernet Cable Testing
*1 Two differential probes required for Return Loss measurement
