RFID Test
Delivering confidence to confront the most challenging RF designs.
Quickly solve Radio Frequency Identification measurement issues with Tektronix RFID test solutions. RFID technologies, including applications such as Near Field Communication and Tire Pressure Monitoring Systems, are developing at a rapid rate and being integrated on devices with other RF technologies. With the industry's most complete standard support and deep acquisition memory, Tektronix solutions simplify complete characterization and troubleshooting of these designs.
Videos
- Introducing RTSA with DPX Technology Demo
This tutorial describes the DPX™ Spectrum display and how it addresses situations involving brief, intermittent, complex and coincident signals. Also covered are the methods for achieving its key performance specifications: 1 Detection and measurements on a signal as short as 24 ms and 2 48,828 spectral transforms per second, compressed into a display that is even easier to read than a conventional spectrum trace. - Solving Challenges in UHF RFID Systems Webinar
This webinar offers a systematic, detailed approach to analyzing the performance of a UHF RFID system using the features available in the Tektronix RSA3000 Series Real-Time Spectrum Analyzer (RTSA). While there are a variety of frequency bands and applications for RFID, this presentation will offer examples with a focus on the 900 MHz and 433 MHz bands. The challenges and solutions presented here often apply to LF and VHF frequency bands, as well. - RTSAs: Enabling Cetecom to lead the RFID industry
Cetecom uses a Real-Time Spectrum Analyzer at the heart of their RIDER test platform to provide the ability to test a wide range of frequencies, data rates and other timing parameters.
View All RF Videos
These videos range from fundamentals to the latest in advanced signal generation and analysis capabilities required to overcome the most challenging microwave and RF design challenges with confidence.
Application Notes
- RFID/NFC/TPMS Solutions Fact Sheet
This brief fact sheet provides an overview of the challenges and solutions for FRID/NFC/TPMS design, compliance and field validation. - Solving the Most Difficult RFID Testing Challenges
This application note offers a systematic, detailed approach to analyzing the performance of an RFID system, and the environment in which it is deployed. - RFID Technology and Testing
An article at RF Designline - Ensure RFID Success with Pre-compliance Testing
An article at Microwave Journal - Creating test signals for SIGINT receivers
This article addresses the challenges involved in generating a wide range of real-world signals required to test an effective SIGINT receiver. By RF Design.
