DCSIMG
Tektronix » Applications » Embedded » Memory » DDR3 Recommended Equipment

DDR3 Recommended Equipment

Supported SDRAM standards*
SDRAM Data Rate
MT/S
Clock
MHz
VDD
V
DDR3-800 800 400 1.5
DDR3-1066 1066 533 1.5
DDR3-1333 1333 667 1.5
DDR3-1600 1600 800 1.5
*Additional speeds supported with custom clocking selection in analysis software

DDR3 Electrical Validation and Debug

Recommended for DDR 1, 2 and 3 Electrical Validation and Debug Quantity
Oscilloscope Tektronix Real Time DPO/DSA70804B or higher 1
Oscilloscope Analysis Software Opt. DDRA - DDR Memory Bus Analysis
Opt. ASM - Advanced Event Search And Mark
Opt. DJA - DPOJET Jitter and Eye Diagram Analysis - Advanced
1 each
Accessories NEX-DDR3MP78BSC DDR3 x4/x8 Solder Chip Interposer for Oscilloscope Probes or
NEX-DDR3MP78BSCSK DDR3 x4/x8 Socket Chip Interposer for Oscilloscope Probes – memory chip socket
1
Active Differential Probe P7300 or P7500** Series Differential Probes 2 or more
**TriMode (020-2955-00) Micro-Coax Tips and Socket cable (020-2954-00) recommended for use with P7500 Series

DDR3 Digital Validation and Debug

Recommended for DDR Digital Validation and Debug*** Quantity
Logic Analyzer Mainframe TLA7012 Portable or TLA7016 Benchtop 1
Logic Analyzer Module*** TLA7BB4 Module 1 or more*
Test Fixture/Support Package Nexus Technology NEXVu DDR Support  
Probing Different options are available: Tektronix midbus probes or Nexus slot interposer, instrumented DIMMs and BGA Chip Interposer  
***Exact configuration may vary depending on your DDR standard and speed. Please contact your local Tektronix Sales representative for a detailed recommendation.

DDR3 Circuit Board Verification & Signal Path Characterization

Recommended for DDR 1, 2 and 3 Circuit Board Verification & Signal Path Characterization Quantity
Sampling Oscilloscope DSA8200 Sampling Oscilloscope 1
Modules 80E04 or 80E10 TDR Sampling Module 1
Analysis Software 80SSPAR IConnect S-parameter Software 1