DDR2 Recommended Equipment
| Supported SDRAM standards | |||
|---|---|---|---|
| SDRAM | Data Rate MT/S |
Clock MHz |
VDD V |
| DDR2-400 | 400 | 200 | 1.8 |
| DDR2-533 | 533 | 267 | 1.8 |
| DDR2-667 | 667 | 334 | 1.8 |
| DDR2-800 | 800 | 400 | 1.8 |
| DDR2-1066 | 1066 | 533 | 1.8 |
DDR2 Electrical Validation and Debug
| Recommended for DDR 2 Electrical Validation and Debug | Quantity | |
|---|---|---|
| Oscilloscope | Tektronix Real Time DPO/DSA70604B or higher | 1 |
| Oscilloscope Analysis Software | Opt. DDRA - DDR Memory Bus Analysis Opt. ASM - Advanced Event Search And Mark Opt. DJA - DPOJET Jitter and Eye Diagram Analysis - Advanced |
1 each |
| Active Differential Probe | P7300 or P7500* Series Differential Probes | 2 or more |
| *TriMode (020-2955-00) Micro-Coax Tips and Socket cable (020-2954-00) recommended for use with P7500 Series | ||
DDR2 Digital Validation and Debug
| Recommended for DDR Digital Validation and Debug** | Quantity | |
|---|---|---|
| Logic Analyzer Mainframe | TLA7012 Portable or TLA7016 Benchtop | 1 |
| Logic Analyzer Module** | TLA7BB4 Module | 1 or more* |
| Test Fixture/Support Package | Nexus Technology NEXVu DDR Support | |
| Probing | Different options are available: Tektronix midbus probes or Nexus slot interposer and instrumented DIMMs | |
| **Exact configuration may vary depending on your DDR standard and speed. Please contact your local Tektronix Sales representative for a detailed recommendation. | ||
DDR2 Circuit Board Verification & Signal Path Characterization
| Recommended for DDR 1, 2 and 3 Circuit Board Verification & Signal Path Characterization | Quantity | |
|---|---|---|
| Sampling Oscilloscope | DSA8200 Sampling Oscilloscope | 1 |
| Modules | 80E04 or 80E10 TDR Sampling Module | 1 |
| Analysis Software | 80SSPAR IConnect S-parameter Software | 1 |