Display

The latest high-speed serial data display technologies simplify connectivity between devices and deliver exceptional audio/video quality.

Tektronix provides a powerful and comprehensive test instrument portfolio for a variety of standards, including: HDMI, DisplayPort, DiiVA, DVI, and more.

HDMI: CTS 1.4a

Product Description Source
Test		 Cable
Test		 Sink
Test
Oscilloscope DPO/DSA/MSO70804 or higher with Opt 2XL for HDMI and HDMI Direct Synthesis (DS) testing, or DPO7104C or higher or DPO/DSA/MSO70000 Series for HEAC testing 1 1 1
Software Option HT3 — HDMI compliance software Non Direct Synthesis based solution 1 1 1
Option HT3 DS — Support for Sink and Cable tests as per CTS V1.4a for Direct Synthesis Capability (pre-requisite Opt HT3)   1 1
Option HEAC — HEAC Compliance Testing for Source and Sink tests (for Cable tests use DSA8200 configuration) 1   1
Probes P7313SMA for HDMI and HDMI Direct Synthesis testing Min. 2/ Max. 4 Min. 2 2
P7330 / P6330 / TDP1000 / 1500 / 3500 Differential probes for HEAC testing 1   1
P6245 / TAP2500 probe for HEAC testing 2   2
DIRECT SYNTHESIS METHOD for Sink and Cable testing. (No need for HW cable emulators and HW TTC filters for all resolutions.)
HDMI Generator AWG7122 with opt 01, 06, 08   2 2
AFG3102   1 1
HDMI Direct Synthesis Accessory Kit 020-3018-00 required for Direct Synthesis setup   1 1
TRADITIONAL DTG METHOD for Sink and Cable testing using Hardware Cable emulators & TTC Filters. (Will need hardware cable emulators available from third party.)
HDMI Generator DTG5334 with DTGM30(Qty:2) and DTGM32   1 1
AWG7102 with opt. 01, 06 or
AWG7122 with opt. 01, 06, 08 or
AFG3102		   1 1
Bias-Tees Mini Circuits Bias-Tees with 50 Ohms from Mini-Circuits (order individually as ZX85-12G-S+) Min. 4/
Max. 6		 2 2
TTC Filters Transition Time Converters from Picosecond Pulse Labslink to external site: 27/74.25 MHz: 5915-100-430PS(Qty:2); 145.5 MHz: 5915-100-200PS(Qty:2); 165 MHz: 59151-100-150PS (Qty:2); 222.75 MHz: 5915-100-120PS (Qty:2); 335 MHz: no filter required     1 set
GPIB Cables for DTG Setup HS GPIB cables   2 2
HDMI Test Fixtures TF-HDMI-TPA-STX for Type A HDMI Fixture for Source and Sink testing 1 1;  
TF-HDMI-TPA-S for Type A HDMI Fixture for Source, Sink and Cable testing 1 1 1
TF-HDMIC-TPA-STX for Type C HDMI Fixture for Source and Sink Testing 1 1  
TF-HDMIC-TPA-S for Type C HDMI Fixture for Source, Sink and Cable testing 1 1 1
TF-HDMID-TPA-P for Type D (mobile) Plug Fixture with Type D HEAC capability also (for Source and Sink testing) 1 1 1
TF-HDMID-TPA-R for Type D (mobile) Receptacle Fixture with Type D HEAC capability   1  
TF-HDMIE-TPA-KIT Automotive HDMI fixture includes Type E Plug Fixture and 2 Type E Receptacle Fixtures 1 1 1
TF-HEAC-TPA-KIT HEAC Test Fixture for Type A and Type C HEAC device & Cable testing (Includes Main Board, Type A plug Fixture, Type C Plug Fixture, 2 Type A Receptacle Fixtures, 2 Type C Receptacle Fixtures) 1 1 1
TF-HDMI-TPA-CE EDID Fixture with 1.3/1.4a EDID EEPROM, Ribbon cable (for connection to main fixtures) 1   1
DC Power Supply 5V power supply   1 1
TDR System DSA8300 Series with 80E03 and 80E04 with IConnect software (80SSPAR) for HEAC cable testing   1 set 1 set
Cables SMA 1.5 meter cables 174-1428-xx (for DTG setup)   4 12
Interface Cables Direct GPIB with oscilloscope as controller, or NI-GPIB-USB — A/B/HS w/Drive software from National Instruments link to external site (with DPO7000 Series or DPO/DSA/MSO70000 Series)   1 1

DisplayPort

DisplayPort

Product Description Source
Test		 Sink
Test		 Passive
Cable
Test		 Active
Cable
Test
Oscilloscope DPO/DSA/MSO70804 or higher and
Opt. 5XL, DJA		 1      
DSA8300 Sampling Oscilloscope     1 1
Modules for Sampling Oscilloscope 80E04 TDR Module     4 1
Opt. ADVTRIG       1
Software Oscilloscope option DP12 DisplayPort CTS 1.2 Conformance Tool   1    
80SSPAR Iconnect TDR and S-Parameter Software     1 1
80SJNB Jitter Analysis       1
Signal Source BSA85C with option STR   1   1
Test Fixtures TF-DP-TPA-PT DisplayPort Plug Adapter with Aux Box Cable 1 1    
TF-DP-TPA-R DisplayPort Receptacle Adapter     1 1
TF-DP-TPA-PR2XCT DisplayPort Adapter Kit with Aux Box Cable 1 1 1 1
TF-MINI-DP-TPA-PT miniDisplayPort Plug with Aux Box Cable 1 1    
TF-MINI-DP-TPA-R miniDisplayPort Receptacle     1 1
TF-MINI-DP-TPA-PR2XT miniDisplayPort Plug, Receptacle, with Aux Box Cable 1 1 1 1
TF-EDP-TPA-R eDP Receptacle Adapter 1 1    
TF-EDP-TPA-PRC eDP Adapter Kit 1 1    
Controller DisplayPort Auxilary Channel Controller (DP-AUX) 1 1    
Accessories TF-EDP-TPA-PRC eDP Adapter Kit 1 1    
BSA12500ISI General purpose ISI board   1    
TF-DP-CIC-C1 VESA Approved DP1.2 Cable Compliance Interconnect Channel Board   1    
Keithley RF Switch: Part Number KEITHLEY SYSTEM 46, Model Number: S46T – BBBB0000UUUUA (Optional) 1 (optional)      
Weinschel Model 1580 Power Splitter   2 each 2 each 2 each
Picosecond Pulse Lab Filter P/N: 5915-110-100ps   4 each    
Picosecond Pulse Lab DC Block P/N: 5501A   2 each    
Phase Matched SMA Cable Set P/N: 174-5711-01   2 each   4
SMA Cables P/N: 174-1341-00   4 each    
Female-to-Female SMA Adapter P/N: 015-1012-00       4
Terminators P/N: 015-1022-01 8 each 20 each    
P7380 Differential Probe (for HBR2[1.6, 2.7 Gbps] speeds) 4 each      
P7313SMA Differential Probe (for HBR2[5.4 Gbps] speeds) 4 each      

 

DiiVA

Product Description Quantity
Oscilloscope DPO/DSA/MSO71254 (or higher) with DPOJET and Option DiiVA 1
Automated Compliance Software TekExpress based Diiva Advanced Analysis and Automation Software -Option DiiVA 1
Signal Generator AWG7122 or higher 1
Test Fixtures TF-DiiVA-TPA-P 2
TF-DiiVA-TPA-R 2
TF-DiiVA-TPA-C (calibration fixture) 1
Differential Probes P7313SMA ( also used for single ended tests) min.2 / max. 4
SMA cables 174-4944-01 8
DC Block 5508-110 (available from Picosecond Pulse Labs) 8
Golden Demo Boards DiiVA Sink Golden Demo Board (available from DiiVA Consortium) 1
DiiVA Sink Golden Demo Board (available from DiiVA Consortium) 1

DVI

Product Description Quantity
Oscilloscope DPO/DSA/MSO70000 Series with options DJA and DVI 1
Oscilloscope Probes P7350, P7330, P6330 Differential Probe 1
P7240, P6249 Single-Ended Probe 1
Signal Generator AWG7000 Series with options 01 and 06, or 1
DTG5334 with DTGM31 modules 1

MHL: CTS 1.1

Product Description Source Test Cable Test Sink Test
Oscilloscope DPO/DSA/MSO70000 Series with BW > 8GHz with Options 2XL, DJA and MHL. Add OPT 20XL if using Protocol Analyzer software 1 1 1
DPO2024, MSO2024, or MSO4054 required for following tests in CTS ID 3.1.1.13; 4.1.1.7; 5.1.1.7 and 5.1.1.8 1 1 1
DSA8300 with 80E03 and 80E04 modules with I-connect SW   1  
Software Option MHD: MHL Advanced Analysis and Compliance SW and TEK-PGY-MHL-PA_SW 1    
Arbitrary Waveform Generator AWG7122C with: Opt 01,02/06 and 08 with 2# 120PS TTC Filter, 2# Picosecond pulse labs 5866 amplifiers and 2# Zx-85-12GS Bias Tees     1
Power Supply PWS4205 or PWS2185 (if using external Power Supply option) and for the following tests in CTS ID 3.1.1.13; 4.1.1.7; 5.1.1.7 and 5.1.1.8 1 1 1
Digital Multimeter DMM4020 used for the following tests in CTS ID:3.1.1.1 and 7.2.1.15 1    
Source Meter Keithly Source meter 2400 for Cable tests IDs 7.2.1.13 and 7.2.1.14   1  
Probe P7313SMA probes( Qty.2) for Diff and SE tests 2   1
P7240 ( Qty.1) for CM MHL Clk probing 1   1
Passive Probes P2221/TPP0500 1 1 1
Fixtures Wilder MHL RXSen Fixture 640-0458-000 for Test ID 3.1.1.13 1    
Wilder MHL Fixture for Sink Impedance test 640-457-000   1  
Wilder MHL Fixture for Dongle Impedance test 640-454-000   1  
Fixture Kit Wilder MHL Fixture Kit for Source testing. Wilder part number 640-0476-000. Kit Consists of 640-0452-000 and 640-0453-000 1    
Wilder MHL Fixture Kit for Sink testing. Wilder part number 640-0477-000. Kit Consists of MHL Sink Test Kit includes 640-0452-000, 640-0456-000, 640-0457-000   1  
Wilder MHL Fixture Kit for Dongle Testing. Wilder part number 640-0478-000. Kit Consists of MHL Sink Test Kit includes 640-0452-000, 640-0453-000, 640-0454-000   1  
Wilder MHL Fixture Kit for Cable Testing. Wilder part number 640-0479-000. Kit Consists of MHL Sink Test Kit includes 640-0455-000, 640-0456-000   1  
Sink Board CBUS Sink Board - Simplay Labs MHL Rx/Tx Analyzer SL-860 (Source DUT Port) 1    
Source Board CBUS Source Board - Simplay Labs MHL Rx/Tx Analyzer SL-860 (Sink DUT Port)   1 1
DC Blocks 2# DC Blocks MCL 15542 Blk-18 DC Block 50 ohms   1  
Product Series

HDMI Compliance and Sink Characterization Using theDTG5000 Series Data Timing Generator

Higher-end displays are rapidly moving to digital or dual-interface designs, and manufacturers need new tools to ensure that their products will be compatible and will operate at peak performance under less-than ideal conditions. The DTG5000 Series of high performance data generators solves...

 DTG5000

How Do You Get the Most Out of Your Tektronix Performance Oscilloscope

Understand the important signal acquisition and usability features of your oscilloscope to achieve quicker results.

 DPO7000

The Basics of Serial Data Compliance and Validation Measurements

This primer is designed to help you understand the common aspects of serial data transmission and to explain the analog and digital measurement requirements that apply to these emerging serial technologies

 TLA7SA00

Understanding and Characterizing Timing Jitter Primer

Timing jitter is the unwelcome companion of all electrical systems that use voltage transitions to represent timing information. This paper focuses primarily on jitter in electrical systems.

Physical Layer Compliance Testing for HDMI Using TDSHT3 HDMI Compliance Test Software Application Note

This application note describes various tests that ensure validation, the challenges faced while testing complex HDMI signals and how oscilloscope-resident test software enables reliable results and automation to perform a wide range of tests.

Display Testing Solutions

Support for PHY Layer Testing of Source, Sink and Cable

Is it time to reconsider DisplayPort?

In light of HDMI's popularity, why are more than 180 companies actively supporting DisplayPort, another audio/video interface standard? Article from Embedded.com

Direct Synthesis Comes to the Aid of Serial Measurements

An analog approach to revolutionize serial data receiver measurement methodologies.

Receiver Test Solution Application Fact Sheet

An overview about receiver testing and available measurement solutions. 		DSA8300

Testing your High Definition embedded devices using the HDMI Version 1.3 specification

Embedded.com
Product Series

Tips for Fast+ Efficient Debug of Serial Buses Webinar

Many embedded systems today utilize serial buses like I2C, SPI and USB for chip to chip communications and peripheral control. In this webinar, you'll learn how to debug these systems quickly with automated decode, trigger and search on common serial bus topologies. This approach will save hours of debugging time by automating the serial decoding process. Learn how to capture common serial bus traffic on an oscilloscope and view in a decoded format, helpful steps showing how to quickly debug signaling and electrical issues found in these serial buses, and more. The speaker Chris Loberg is a Senior Marketing Manager at Tektronix 		MSO/DPO3000

Acting on Impulse: Equalization and Emphasis Webinar

Learn how equalization can turn the tables on signal path effects.

Advantages of Stress Testing Receivers with Synthesized Waveforms Webinar

Learn the best way to perform stress receiver tolerance tests with signal generation. By using an Arbitrary Waveform Generator, you gain the advantages of flexibility, ease of use, increased control, faster testing, and insightful diagnostics.

Overcoming Challenges in S-Parameter Measurements

In this webinar we will describe and demonstrate the latest tools available to perform serial data S-parameter measurements for more efficient signal integrity analysis. This versatile approach provides repeatable, accurate, cost-effective results.

SHARE THIS PAGE:

STAY INFORMED: Events & Seminars

MEMBERSHIP: Create an account for exclusive membership privileges. Learn More | Login