Recommended Solution for SATA RSG/RMT Tests
| Recommended Equipment | Quantity | |
| Compliance Automation Software | TekExpress™ (TEKEXP opt. SATA-RSG or opt. SATA-DHB Device or Host SW Bundle) | 1 |
| Real-time Oscilloscope* | Any of the following three instruments: DSA72004, DSA71604, DSA71254. TDSRT-EYE™ and TDSJIT3 analysis software are standard on DSA models. | 1 |
| Other Supported Oscilloscopes | TDS6000C Oscilloscopes (available for rent through distributors or used through TekSelect), TDSJIT3 | in place of above |
| SMA Adapters | TCA-SMA | 4 |
| Differential SMA Probe | P7313SMA (optional) | 2 |
| High Speed Signal Source | AWG7122B with Opt. 6 and Opt. 8 | 1 |
| RF Switch | Model # S46-6666A (purchase from Keithley Instruments) | 1 |
| Frame Error Counter | SATA-II | 1 |
| Phase Matched SMA Cables | Tek P/N: 174-4944-01 | 6 pair |
| Attenuators | Tektronix part number 015-1001-01 | 2 |
| LAN Cables | To share folders and control the instrument over LAN | 2 |
| Connectors | GPIP 488.2 connections (USB-GPIB or GPIB cable from controller PC to RF Switch) | 1 |
| SATA Test Fixture for DUT connectivity | TF-SATA-NE-ZP and TF-SATA-FE-ZP (purchase from Crescent Heart Software  (1 MB)) |
1 each |
*Note: RSG real-time oscilloscope required for AWG jitter calibration.
Learn More