Recommended Test Equipment for HDMI Compliance Testing per CTS (Compliance Test Specification) V1.3c
HDMI Source Test
| Recommended Equipment | Quantity | |
|---|---|---|
| Oscilloscope | DSA70804, DSA71254, DSA71604 or DSA72004 with Opt 2XL; or DPO70804, DPO71254, DPO71604, or DPO72004 with Opt 2XL | 1 |
| Other Supported Oscilloscopes 1, 2 | TDS6804B, TDS6124C and TDS6154C | 1 |
| Software | TDSHT3 - HDMI compliance software (support for CTS V1.3b requires software Version 3.3.0 or higher). Support for CTS V1.3b1 and support of 4-channel measurement requires software Version 4.0 or higher) | 1 |
| Probes | P7313SMA differential SMA probe - use for all differential and single-ended measurements. | 2 or 43 |
| Test Fixtures | ET-HDMI-TPA-STX - HDMI Type A fixture set for Transmitter Test. Order from Efficere Technologies. | 1 set |
| Power Supply | 3.3V power supply | 1 |
| Connector | Bias-Tees to terminate the unused fixture ports with 50 Ohms after pulling the DC of the Bias-Tees to 3.3V. Order individually as ZX85-12G-S+ from Mini-Circuits | 8 pcs |
1 Oscilloscopes with bandwidth less than 8 GHz will only support HDMI testing at limited resolution and clock/data rates.
2 16M per channel or greater record length is required for HDMI Compliance test.
3 Four SMA probes are required to take full advantage of the 4-channel source measurement capability, cutting test time to almost half.
Learn More